manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 183 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 183

System Description

Console

0.0

04/2012

0.0

B.5-19

0.0

Support of postscript printers

B.5

A Siemens CT system is a medical device where under no cir-
cumstances other software than the released 

syngo

 CT software 

may be installed. This also applies to printer drivers for post-
script printers. 

B.5

Your software includes the generic Adobe Postscript Driver. With 
this generic printer driver, different postscript printers can be 
connected to a Siemens CT system without the need of install-
ing any specific printer driver for the individual printer. 

B.5

Siemens only allows the connection of a postscript printer via a 
TCP/IP network port or locally at the parallel interface. Con-
nected postscript printers shall be used primarily for printing the 
reports that are created in the different applications available on 
the system. Postscript Printers might also be used to print med-
ical images. These printouts are not for diagnostic use. 

B.5

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments