manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 148 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 148

0.0

0.0

Scan Unit (Gantry)

System Description

B.2-10

SOMATOM Spirit

0.0

Predefined table position

B.2

B.2

With the keys 

A

 and 

B

, you can move the table to two predefined 

positions.These positions can be preset, for more information 
please refer to 

(→

Page C.2-7 

Moving to the predefined table 

position

)

B.2

Laser light marker  

B.2

B.2

With this key, you switch the laser light marker on and off. The 
laser light marker indicates the position of the scan center and 
the slice plane in the middle of the detector rows.

B.2

i

.2

B

After approximate 1 minute, the laser light marker is switched 
off automatically.

B.2

Tabel retraction 

B.2

B.2

With this key, you move the table top out of the gantry opening 
and lower it. The key is active as long as it is pressed. The patient 
can then leave the table.

B.2

i

.2

B

The gantry is automatically set vertical first, if the gantry tilt dif-
fers from 0.

B.2

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments