manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 121 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 121

Safety

Software Related Safety Information

0.0

04/2012

0.0

A.4-37

0.0

Exporting and recording off-line files

A.4

You can copy one or several data objects to specific enabled 
directories of the system hard disk or within the network.

A.4

All files, for example, images in BMP format and sequences of 
images in AVI format, exported previously to a specific directory 
can be recorded automatically on CD-R. The path of this specific 
directory is configurable by service personnel but the default 
path is “H:\sitedata\offline”.

A.4

A.4

A.4

CAUTION

A.4

Using another directory for Camtasia data files!

A.4

Data disk is full and no further examination possible. You 
can not delete files any more.

A.4

✧

Use only the configured directly for saving the Camtasia 
data files.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments