manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 112 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 112

0.0

0.0

Software Related Safety Information

Safety

A.4-28

SOMATOM Spirit

0.0

Patient & file management

A.4

System security

A.4

By activating the 

syngo

 security system, the customer service 

technician turns your system into a system with high data pro-
tection level.

A.4

To secure your system, you will have to instruct a service techni-
cian as to which security options you want to be enabled.

A.4

A.4

A.4

CAUTION

A.4

There is no undo!

A.4

After activating the security system, access is limited to only 
the defined users. Once the security system is activated, it is 
not possible to deactivate it (instead, you would have to 
reinstall the completed 

syngo

 system on the computer from 

scratch).

A.4

✧

Make sure you have read and completed all preparatory 
steps. 

✧

Back up your complete system as done after installation 
before activating the security system.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments