manualshive.com logo in svg

Siemens SOMATOM Spirit, Operator'S Manual, Page: 106 / 484

Share
Download
Siemens SOMATOM Spirit Operator'S Manual Download Page 106

0.0

0.0

Software Related Safety Information

Safety

A.4-22

SOMATOM Spirit

0.0

Data compression

A.4

Patient and examination data can be stored or exported com-
pressed or uncompressed.

A.4

A.4

A.4

A.4

CAUTION

A.4

Compression method is set to irreversible compression (Lossy 
JPEG)!

A.4

The resulting images are no longer completely identical to 
the original images. Information of medical relevance may 
be lost.

A.4

✧

Lossy compressed images should not be used for primary 
diagnosis, the image quality may not be sufficient.

✧

Lossy compression is indicated in the image displayed. The 
indication will be displayed except if "No Text" is in effect.

✧

Pay attention to corresponding entries in the image text.

A.4

CAUTION

A.4

Lossy compression is selected for data transfer!

A.4

Image quality of the lossy compressed images may no 
longer be adequate for diagnostic purpose.

A.4

✧

Do not use lossy JPEG compression for sending data to a 
report or primary diagnosis workstation.

✧

Do not use lossy JPEG compression for archiving.

Summary of Contents for SOMATOM Spirit





































































































































































































































































































































































































































































































Reviews:

No comments