manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 33 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 33

Safety

General Safety Information

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

A.1-11

0.0

Computer viruses  

A.1

While Siemens Medical Solutions takes measures to prevent 
computer viruses from being transmitted via Internet/Intranet 
we cannot guarantee that hacker attacks or attachments do not 
contain computer virus code. Siemens customers are therefore 
advised to sign a service level agreement (SLA) or maintenance 
contract, which includes remote access and SW security 
updates both for virus pattern and operating system updates. 
Please contact your local Siemens Customer Services depart-
ment.

A.1

A virus scanner is available. It has to be activated by Siemens 
Service. The virus scanner is running in the background and 
being updated regularly. The user has to accept the installation 
of the new pattern. In case of a virus alert it is recommended to 
inform the Siemens Service.

A.1

A.1

A.1

CAUTION

A.1

System infected by computer virus!

A.1

Manipulation of the software.

A.1

✧

Never

 use a data medium that could contain a computer 

virus (e.g., game CD).

✧

Check disks for viruses 

before

 using them.

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments