Siemens SN45ZW56CS, User Manual

Page: 27 / 64

Before using for the first time
en
27
3.
Set the slider to ON.
4.
Clean under running water.
5.
Place the glassZone in the top
basket and lock in position ⁠.
Check that the mounts are in the
correct position.
a
The glassZone audibly clicks into
position ⁠.
6.
Push in the top basket.
Basket heights
Set the baskets at the right height.
Appliance height 81.5 cm with cutlery drawer
Setting Top basket Bottom basket
1 max. ø 16 cm 31 cm
2 max. ø 18.5 cm 27.5 cm
3 max. ø 21 cm 25 cm
Before using for the first time
Before using for the
first time
Before using for the first time
Configure the settings for initial start-
up.
Performing the initial config-
uration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip:
Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
→
"Home Connect quick start",
Page 41
Requirement:
"The appliance has
been installed and connected."
→
Page 13
1.
"Add special salt." → Page 28
2.
"Add rinse aid." → Page 30
3.
"Switch on the appliance."
→
Page 35
4.
"Setting the water softening sys-
tem." →
Page 28
5.
"Set the amount of rinse aid to be
dispensed." →
Page 31
Tip:
You can change these settings
and other "Basic settings"
→
Page 38 at any time.