Siemens SN43HW88CS, Information For Use

Page: 54 / 64

en
Troubleshooting
54
Fault Cause Troubleshooting
All LEDs lit up or flashing. Electronics have detected a
fault.
1.
Press the main switch button for ap-
prox. 4 seconds.
→
"Controls", Page 15
The appliance is reset and restar-
ted.
2.
If the problem occurs again:
‒
Switch off the appliance.
‒
Pull out the mains plug or
switch off the fuse in the fuse
box.
‒
Wait at least 2 minutes.
‒
Switch on the fuse in the fuse
box or insert the mains plug.
‒
Switch the appliance on.
3.
If the problem occurs again:
‒
Contact customer service.
→
"Customer Service",
Page 57
Mechanical damage
Fault Cause Troubleshooting
Appliance door cannot be
closed. Door lock has been activ-
ated.
▶
Close the appliance door with
greater force.
Door cannot be closed due
to installation method.
▶
Check whether the appliance has
been installed properly.
When closed, the appliance door,
its decor or attached parts should
not knock against adjacent cabin-
ets or the worktop.
Lid on the detergent dis-
penser cannot be closed. Detergent dispenser or lid
are blocked by sticky deter-
gent residue.
▶
Remove detergent residue.
Noise
Fault Cause Troubleshooting
Filling valves making knock-
ing noises. Caused by the domestic in-
stallation. No appliance fault
present. Does not affect
functioning of the appliance.
▶
Can only be remedied in the do-
mestic installation.
Knocking or rattling noise. Spray arm is striking table-
ware.
▶
Arrange tableware so that the spray
arms do not strike tableware.