background image

Features

 en

23

1.

Push the lever forwards   and fold
down the prongs  ⁠.

1

2

2.

To use the prongs again, fold them
back up.

a

The prongs audibly click into posi-
tion.

Stemware basket

Use the stemware basket to ensure
perfect dishwashing results for your
stemware.

Loading stemware basket

You can place up to 4 stemware bas-
kets in the bottom basket at the
same time.

Requirements

¡

The top basket is set to setting 1. 
→ 

"Adjusting top basket with side

levers", Page 21

¡

The prongs in the bottom basket
are folded down. 
→ 

"Folding down prongs", Page 22

1.

Pull up the rotating fixing arms 
and turn anticlockwise  .

2.

Place the stemware with the open-
ing facing down on the shelf.
You can load stemware with the
following dimensions in the stem-
ware basket.

Dimensions

Max. size

Height

245 mm

Opening diameter

105 mm

Stem diameter

approx. 8-9 mm

3.

Position the stem in the lower fix-
ing arm  ⁠.

4.

Turn the rotating fixing arm clock-
wise   and push down  ⁠.

a

The fixing arm clicks into position.

a

The stemware is securely posi-
tioned in the stemware basket.

5.

Lift the stemware basket by the
handle and place in the bottom
basket.

Summary of Contents for SN43HW88CS

































































Reviews: