Cleaning and maintenanceNL
3.
Pull the microsieve downwards.
Cleaning spray arms
Limescale and impurities in the wash
water can block the nozzles and
bearings of the spray arms. Clean the
spray arms regularly.
1.
Unscrew the upper spray arm and
pull it downwards
†
4.
Press the locking pieces together
and remove the coarse sieve
upwards .
1
2
2
1
2.
Pull the lower spray arm upwards.
5.
Clean the sieve elements under
running water.
Carefully clean the dirt edge between
the coarse and fine sieve.
6.
Assemble the screening system.
Check that the coarse sieve locking
cams are engaged.
3.
Check the nozzles of the spray arms
for blockages under running water
and remove any foreign objects.
7.
Insert the sieve system into the
device and turn the coarse sieve
clockwise.
Check that the arrow marks are
opposite each other.
4.
Install the lower spray arm.
aThe spray arm audibly clicks into place.
5.
Fit and screw on the upper spray
arm.
43
