Siemens SN43EI56CS, User Manual

Page: 23 / 60

Before using for the first time
en
23
2.
Insert the baking sheet spray head
in the holder and turn to the
right ⁠.
a The baking sheet spray head
clicks into position.
Removing baking sheet spray head
If you no longer require the baking
sheet spray head, remove it from the
appliance.
1.
Turn the baking sheet spray head
anticlockwise and remove from the
holder.
2.
Insert the top basket in the appli-
ance.
Basket heights
Set the baskets at the right height.
Appliance height 81.5 cm with cutlery drawer
Setting Top basket Bottom basket
1 max. ø 16 cm 31 cm
2 max. ø 18.5 cm 27.5 cm
3 max. ø 21 cm 25 cm
Before using for the first time
Before using for the
first time
Before using for the first time
Configure the settings for initial start-
up.
Performing the initial config-
uration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip:
Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
→
"Home Connect quick start",
Page 36
Requirement:
"The appliance has
been installed and connected."
→
Page 12
1.
"Add special salt." → Page 25
2.
"Add rinse aid." → Page 26
3.
"Switch on the appliance."
→
Page 32
4.
"Setting the water softening sys-
tem." →
Page 24
5.
"Set the amount of rinse aid to be
dispensed." →
Page 27
6.
"Add detergent" → Page 27 .