Siemens SN27YI01CE Page 57 User Manual Download

Page: 57 / 64

Troubleshooting

Fault

Cause

Troubleshooting

Appliance door cannot be
closed.

When closed, the appliance door,
its decor or attached parts should
not knock against adjacent cabin-
ets or the worktop.

Lid on the detergent dis-
penser cannot be closed.

Detergent dispenser or lid
are blocked by sticky deter-
gent residue.

▶

Remove detergent residue.

Noise

Fault

Cause

Troubleshooting

Filling valves making knock-
ing noises.

Caused by the domestic in-
stallation. No appliance fault
present. Does not affect
functioning of the appliance.

▶

Can only be remedied in the do-
mestic installation.

Knocking or rattling noise.

Spray arm is striking table-
ware.

▶

Arrange tableware so that the spray
arms do not strike tableware.

With a small load the water
jets directly strike against
the tub.

▶

Distribute the tableware evenly.

▶

Load the appliance with more table-
ware.

Light items of tableware
move about during the wash
cycle.

▶

Position light items of tableware se-
curely.

Summary of Contents for SN27YI01CE

































































Search results

Summary of Contents for SN27YI01CE

Reviews:

Related manuals for SN27YI01CE

Brands by name

Popular brands

Siemens SN27YI01CE, User Manual

Search results

Summary of Contents for SN27YI01CE

Reviews:

Related manuals for SN27YI01CE

Brands by name

Popular brands