background image

Technical specifications

 en

59

The contact details for Customer Ser-
vice can be found in the enclosed
Customer Service directory or on our
website.

Product number (E-Nr.), pro-
duction number (FD) and con-
secutive numbering (Z-Nr.)

You can find the product number (E-
Nr.), the production number (FD) and
the consecutive numbering (Z-Nr.) on
the appliance's rating plate.
The rating plate is located inside the
appliance door.
Make a note of your appliance's de-
tails and the Customer Service tele-
phone number to find them again
quickly.

AQUA-STOP guarantee

In addition to warranty claims against
the seller under the purchase agree-
ment and in addition to our manufac-
turer's warranty, we offer compensa-
tion under the following conditions.

¡

If our Aqua-Stop system is defect-
ive and causes water damage, we
will make good the damage for
private users. To ensure protection
from water damage, the appliance
must be connected to the power
supply.

¡

The liability guarantee is valid for
the service life of the appliance.

¡

A claim can only be made under
the guarantee if the appliance has
been correctly installed and con-
nected with Aqua-Stop according
to our instructions; this also in-
cludes correctly fitting the Aqua-
Stop extension (genuine access-
ory). Our guarantee does not cover

defective supply lines or fittings up
to the Aqua-Stop connection on
the tap.

¡

If your appliance is fitted with
Aqua-Stop, you can in principle
leave your appliance unattended
during operation and the tap
turned on afterwards. The tap only
needs to be turned off if you are
away from home for a long period,
e.g. on holiday for several weeks.

Technical specifications

Technical specifications

Technical specifications

Weight

Max.: 60 kg

Voltage

220 - 240 V, 50 Hz or
60 Hz

Power rating

2000 - 2400 W

Fuse

10 - 16A

Water pressure

¡

min. 50 kPa
(0.5 bar)

¡

max. 1000 kPa
(10 bar)

Inlet rate

Min. 10 l/min

Water temperature

Cold water.
Hot water max.: 60 °C

Capacity

13 place settings

You can find more information about
your model online at
https://eprel.ec.europa.eu/

1

. This web

address is linked to the official EU
EPREL product database. Please
then follow the instructions on
searching for the model. The model
identifier is made up of the charac-
ters before the slash in the product
number (E-Nr.) on the rating plate. Al-
ternatively, you can also find the
model identifier in the first line of the
EU energy label.

1

Only applies to countries in the European Economic Area

Summary of Contents for SN23EI26CE

































































Reviews: