Siemens SL63HX60CE, User Manual

Page: 32 / 60

NL The Ministry in essence
The Eco 50° program is a very
environmentally friendly program
and ideal for normally soiled
crockery. It is the most efficient
program in terms of energy and
water consumption for this type of
crockery and complies with the EU
Ecodesign Regulation.
If you do not operate the device for
10 minutes, the device will switch
off automatically.
2.
Of
set tart.
the desired program
impressions.
3.
a The time setting is activated.
Tip: The time setting is deactivated by
pressing repeatedly until "h:00"
appears on the display.
Start program
▶
Press .
a The program has ended when
down the display shows
"0h:00m".
Set program
You can adjust the wash cycle to the
degree of soiling of the crockery by
setting a suitable programme.
Remarks
s If you want to add crockery
while the appliance is already in
operation, do not use the tablet
container as a handle for the upper
basket. This will allow you to come
into contact with the partially
dissolved tab.
s You can view the current program
change by canceling the program.
→ "Abort program",
Page 33
s To save energy, it is
appliance switches off automatically 1
minute after the end of the programme.
If you open the door immediately after
the program has ended, the appliance
will switch off after 4 seconds.
▶
Press the program button.
→
"Programs", Page 17
a The program is set and the
program button flashes.
a The remaining program run time
appears on the display.
Set additional function
In addition to the selected washing
program you can set additional
functions.
Remark: The available additional
functions depend on the selected
program.
→ "Programs", Page 17
▶
Press the button of the desired extra
press function.
→
"Additional Features", Page 19
Pause program
Remark: If you open the appliance
door when the appliance has heated
up, it is best to leave the appliance
door ajar for a few minutes and then
close it. In this way you prevent an
overpressure occurring in the
appliance and the appliance door
from jumping open.
a The additional function is set and the
button of the additional function flashes.
Make time setting
You can delay the start of the program
for up to 24 hours.
1.
impressions.
a The display shows "h:01".
32