Siemens SIWAREX MS, Device Manual

Page: 39 / 75

Weighing
Functions
Name Type Length Default Range of Values / Meaning
Checksum WORD 2 0 Checksum
BYTE
1
0
Reserved
Preset tare
BYTE
1
0
1 = Tare memory contains ext. default value
Tare process value *100 DINT 4
0
Tare weight * 100
Zero set value *100
DINT
4
0
Zero set value * 100 (set during zero setting)
12
Table 5-5 Allocation of DS 26
5.7 DS 30 Process Values
The current states and data in the scale can be monitored using process values.
Name Type Length Default Range of Values / Meaning
Checksum
WORD 2 --- Checksum CRC16
Scale status
WORD 2 --- Scale status
For description see chapter
5.7.1
Operating error bits
BYTE 1 --- Operating error bits
For description see chapter
5.7.2
Reserved
BYTE 1 0 Reserve 1
Gross process value
INT 2 --- Gross weight
For description see chapter
5.7.3
Net process value
INT 2 --- Net weight
For description see chapter
5.7.4
Tare process value
INT 2 --- Tare weight
For description see chapter
5.7.5
G/N weight
INT 2 --- B/N weight value to display
For description see chapter
5.7.6
G/N weight *10
DINT 4 --- B/N weight value with 10x resolution (basis for ASCII weight
value)
For description see chapter
5.7.7
Tare weight
INT 2 --- Tare weight value
For description see chapter
5.7.8
Unfiltered raw value
WORD 2 --- Unfiltered digital value from ADU
For description see chapter
5.7.9
Filtered raw value
WORD 2 --- Filtered digital value
For description see chapter
5.7.10
Weight value ASCII
STRING[14] 16 --- ASCII weight value (at an increased resolution for a short time
after the command)
For description see chapter
5.7.11
Millisecond INT 2 0 Runtime – Milliseconds (0....999)
For description see chapter
5.7.12
Second BYTE 1 0 Runtime – Seconds (0...59)
Minute BYTE 1 0 Runtime – Minutes (0...59)
Hour INT 2 0 Runtime – Hours (0...32000)
46
Table 5-6 Allocation of DS 30
SIWAREX MS 5-31