Fault
Action
Cause
Indicator lights do not
ill
i
Fuse tripped.
Switch on/replace fuse.
g
illuminate.
pp
If the fault occurs repeatedly, call
customer service.
Power failure.
Selected programme continues
when power restored. If the
washing is to be removed, proceed
as described under "Cleaning the
pump"; see Page 30.
Plug loose or not plugged in.
Programme does not
start.
"On" indicator light
flashes.
Appliance lid not closed.
Close the lid ("clicks" shut).
Programme does not
start.
"On", "Active" and "End"
indicator lights flash.
Drum lid not closed.
Close the lid.
Programme does not
start.
"
3
" button not pressed.
Press the "
3
" button.
Water does not flow in or
detergent is not
Tap not turned on.
Turn on the tap.
detergent is not
dispensed.
"Active" indicator lights
Inlet hose bent or pinched.
"Active" indicator lights
flashes.
Filters in water inlet blocked.
Clean the filters; see Page 32.
Water is not completely
d i d
Foreign objects blocking the pump.
Clean the pump; see Page 30.
p
y
drained.
"End" indicator light
flashes.
HighĆfluff garments were washed.
Drainage hose bent. Drainage pipe
or drainage hose blocked.
Clean the drainage pipe and/or
drainage hose, see Page 30.
Water runs out from
d
h
li
ScrewĆfitting of inlet hose leaking.
Tighten the screwĆfitting.
under the appliance.
Drainage hose leaking.
Replace the drainage hose.