Siemens SITRANS TH400 Operating Instructions Manual Download Page 53 | Manualshive

Page: 53 / 62

Siemens SITRANS TH400 Operating Instructions Manual Download Page 53

Appendix

A.3 Technical support

SITRANS TH400
Operating Instructions, 06/2010, A5E01018688-02

53

A.3

Technical support

Technical Support

You can contact Technical Support for all IA and DT products:
● Via the Internet using the Support Request:

Support request (

http://www.siemens.com/automation/support-request

)

● E-mail (

mailto:[email protected]

)

● Phone: +49 (0) 180 5050 222

(0.14 €/min for calls from the German fixed network, different prices possible for calls

from cellular phone networks)

● Fax: +49 (0) 180 5050 223
Further information about our technical support is available in the Internet at

Technical Support (

http://www.siemens.com/automation/csi/service

)

Service & Support on the Internet

In addition to our documentation, we offer a comprehensive knowledge base online on the

Internet at:
Services & Support (

http://www.siemens.com/automation/service&support

)

There you will find:
●  The latest product information, FAQs, downloads, tips and tricks.
●  Our newsletter, providing you with the latest information about your products.
●  A Knowledge Manager to find the right documents for you.
●  Our bulletin board, where users and specialists share their knowledge worldwide.
●  You can find your local contact partner for Industry Automation and Drives Technologies

in our partner database.

● Information about field service, repairs, spare parts and lots more under "Services."

Additional Support

Please contact your local Siemens representative and offices if you have any questions

about the products described in this manual and do not find the right answers.
Find your contact partner at:
Partner (

http://www.automation.siemens.com/partner

)

A signpost to the documentation of the various products and systems is available at:
Instructions and Manuals (

http://www.siemens.com/processinstrumentation/documentation

)

«
...
51
52
53
54
55
...
»

Summary of Contents for SITRANS TH400































































Reviews:

No comments