Procedure
1. Use the and
buttons to navigate in the measurement view.
2. To switch to the parameter view, press the button.
7.1.2.3
Parameter view
Parameter view
The parameter view shows the parameters, parameter values and the wizards of the device.
①
Name and unit of the parameter (alternating)
②
Parameter value
③
Parameter ID
④
"EDIT" symbol (permanently enabled)
Figure 7-5
Example of parameter view
For parameters with an associated unit, the parameter name and unit are displayed as
alternating values in
①
. Example: Lower range value in °C.
List of parameters on the display
The parameters are displayed with parameter ID and parameter name.
Depending on the parameter settings or the device version of your device, some parameters are
not visible.
Parame‐
ter ID
Parameter name on
the display
Meaning
01
TYPE INPUT 1
Input type 1
02
WIRING 1
Connection type for input 1
03
WIRE RES 1
Wire resistance for connecting cable at Input 1
04
TYPE INPUT 2
Input type 2
05
WIRING 2
Connection type for input 2
06
WIRE RES 2
Wire resistance for connecting cable at Input 2
07
PV MAPPING
Assignment of the primary variable
08
UNITS
Set unit of the primary variable
09
LOWER RANGE
Set the lower range value of the primary variable
10
UPPER RANGE
Set upper range value of the primary variable
11
DAMPING
Damping value
12
FUNCT SAFETY
Enable and disable Functional Safety
Operating (SITRANS TF)
7.1 Local operation
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
Operating Instructions, 05/2020, A5E41864807-AB
109