Siemens SITRANS Series Compact Operating Instructions Download Page 14

Page: 14 / 80

1.10

Notes on warranty

The contents of this manual shall not become part of or modify any prior or existing agreement,

commitment or legal relationship. The sales contract contains all obligations on the part of

Siemens as well as the complete and solely applicable warranty conditions. Any statements

regarding device versions described in the manual do not create new warranties or modify the

existing warranty.
The content reflects the technical status at the time of publishing. Siemens reserves the right

to make technical changes in the course of further development.

Introduction
1.10 Notes on warranty

SITRANS TH320/TH420/TR320/TR420/TF320/TF420

Compact Operating Instructions, 03/2018, A5E41865021-AA

Summary of Contents for SITRANS Series

















































































Search results

Summary of Contents for SITRANS Series

Reviews:

Related manuals for SITRANS Series

Brands by name

Popular brands

Siemens SITRANS Series, Compact Operating Instructions

Search results

Summary of Contents for SITRANS Series

Reviews:

Related manuals for SITRANS Series

Brands by name

Popular brands