Siemens SITRANS PCS 7, Function Manual, Page: 639 / 850

3)
The below parameters are available
Addr STRUCT
Qcsf : BOOL Dummy for Csf
Density : BOOL Density
PMedTemp : BOOL Medium Temperature
Tot1 : BOOL Totalizer 1
SetTot1 : BOOL Reset control totalizer 1 (Reset, Preset, Hold, Total‐
ize)
Tot2 : BOOL Totalizer 2
SetTot2 : BOOL Reset control totalizer 2 (Reset, Preset, Hold, Total‐
ize)
VolFlow : BOOL Volume Flow
FractnA : BOOL Fractional flow A
FractnB : BOOL Fractional flow B
FractnAp : BOOL Fractional flow % A
FractnBp : BOOL Fractional flow % B
CorVolFlow : BOOL CorrectID (Standard) volume flow
FrameTemp : BOOL Frame temperature
Tot3 : BOOL Totalizer 3
SetTot3 : BOOL Reset control totalizer 3 (Reset, Preset, Hold, Total‐
ize)
CtrlCmdStatus : BOOL Control command status
CtrlCmd : BOOL Control command
CtrlCmdEnable : BOOL Control command enable
DCtr : BOOL Dosing control command
DAmt : BOOL Dosing Amount
DState : BOOL Dosing State
DFbkDigVlv1 : BOOL Dosing Feedback Digital Valve 1
DFbkDigVlv2 : BOOL Dosing Feedback Digital Valve 2
DFbkAnaVlv : BOOL Dosing Feedback Analog Valve
END_STRUCT
13.4.7 Block diagram of FbFC43PA
A block diagram is not provided for this block.
SITRANS FC430 PA
13.4 FbFC43PA
SITRANS Library for PCS 7
Function Manual, 05/2019, A5E35351976-11
639