Siemens SITRANS P500, Operating Instructions Manual, Page: 12 / 238

Introduction
1.4 Checking the consignment
SITRANS P500 with HART
12
Operating Instructions, 12/2014, A5E02344528-09
The most important changes in the documentation compared with the previous edition are
shown in the following table.
Edition Note
11/2014 The following chapters have been changed:
•
Chapter "Technical data"
1.4 Checking the consignment
1. Check the packaging and the delivered items for visible damage.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for
correctness and completeness.
WARNING
Using a damaged or incomplete device
Danger of explosion in hazardous areas.
• Do not use damaged or incomplete devices.
See also
Technical data (Page 197)
Return procedure (Page 195)
1.5 Transportation and storage
To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly
packaged to provide sufficient protection during transport. Siemens cannot assume
liability for any costs associated with transportation damages.
CAUTION
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
• Provide additional packaging as necessary.