Operate
6.2 Parameter description
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09
119
"2.5.9 Decimal Places"
Factory setting:
2
Setting range:
•
Auto
•
0
•
1
•
2
•
3
•
4
Purpose:
Selection of the decimal place
Description:
This parameter allows you to set the decimal places for the measured value
display of the PV.
6.2.3.6
"2.6 Mechanical Construction"
"2.6.1 Sensor Construction"
"2.6.1.1 Module Fill Fluid"
Factory setting:
e.g. silicone oil M50, or as shown on the order
Purpose:
Display of the fill fluid in the measuring cell
Description:
This parameter records the fill medium of the measuring cell.
"2.6.1.2 Isolator Material"
Factory setting:
e.g. stainless steel 14404, or as shown on the order
Purpose:
Display of the seal diaphragm material
Description:
This parameter records the seal diaphragm material.
"2.6.1.3 O-Ring Material"
Note
Refer to the applicable regulations for pressure equipment and comply with the requirements
as they apply to seal materials.
Factory setting:
e.g. PTFE, or as shown on the order
Adjustment range:
16 characters
Summary of Contents for SITRANS P500
Page 1: ......
Page 2: ......
Page 10: ...Table of contents SITRANS P500 with HART 10 Operating Instructions 12 2014 A5E02344528 09 ...
Page 238: ......