Operate
6.2 Parameter description
SITRANS P500 with HART
110
Operating Instructions, 12/2014, A5E02344528-09
"2.5.1.7 Volume Unit"
Factory setting:
m
3
Adjustment range:
l, ImpGal, m
3
, bbl, Bushel, yd
3
, ft
3
, in
3
, bbl(fl.), Nm
3
, Nl, Stdft
3
, hl
Purpose:
Selection of the unit for the volume measurement type
Description:
You can change the unit for the measured value display locally.
"2.5.1.8 Mass Unit"
Factory setting:
kg
Setting range:
g, kg, MetTon, lb, ShTon, LTon, ounce
Purpose:
Selection of the unit for the mass measurement type
Description:
You can change the unit for the measured value display locally.
"2.5.1.9 Volume Flow Unit"
Factory setting:
m
3
/h
Adjustment range:
Gal/min, l/min, ImpGal/min, Gal/s, Mgal/day, l/s, Miol/day, m
3
/s, m
3
/h,
m
3
/day, ImpGal/h, ImpGal/day, Nm
3
/h, Nl/h, ft
3
/s, ft
3
/min, ft
3
/h, ft
3
/day, bbl/s,
bbl/min, bbl/h, bbl/day, Gal/h, ImpGal/s, l/h, Gal/day
Purpose:
Selection of the unit for the volume flow measurement type
Description:
You can change the unit for the measured value display locally.
"2.5.1.10 Mass Flow Unit"
Factory setting:
kg/s
Adjustment range:
g/s, g/min, g/h, kg/s, kg/min, kg/h, kg/day, MetTon/min, MetTon/h, Met-
Ton/day, lb/s, lb/min, lb/day, ShTon/min, ShTon/h, ShTon/day, LTon/h,
LTon/day
Purpose:
Selection of the unit for the mass flow measurement type
Description:
You can change the unit for the measured value display locally.
"2.5.2 2. Display Value"
"2.5.2.1 Selection"
Factory setting:
Off
Adjustment range:
Depending on the PV, further selection options are displayed.
see below.
Summary of Contents for SITRANS P500
Page 1: ......
Page 2: ......
Page 10: ...Table of contents SITRANS P500 with HART 10 Operating Instructions 12 2014 A5E02344528 09 ...
Page 238: ......