Siemens SITRANS P320, Operating Instructions Manual, Page: 72 / 260

Procedure
You navigate in the views with the buttons:
Views Buttons
Measurement view After the initialization, the measurement view is displayed.
1. Select a random measured value with the buttons or .
2. Change to the parameter view with the button.
3. Return to the measurement view with the button.
Parameter view The "EDIT" symbol has been deactivated permanently.
1. Select a parameter with the buttons
or .
2. Change to the edit view with the button .
3. Return to the measurement view with the button.
Edit view
Parameter view
The "EDIT" symbol flashes.
1. Change the parameter value with the
or button.
2. Apply the change with the button.
You are in the parameter view.
3. Return to the measurement view with the button.
If you do not change any parameters, you return from the edit view to the param‐
eter view with the button.
7.2.3 Measurement view
The measurement view shows the current measured values as well as status and diagnostic
messages:
①
Name and unit of the measured value (alternating)
②
Measured value
③
Measured value ID
④
Bar display
Figure 7-3 Example of measurement view
①
shows the name of the measured value and the set unit as alternating values.
Measured value IDs
③
start with "P".
Operating
7.2 Operating the device with display
SITRANS P320/P420 (mA/HART)
72
Operating Instructions, 06/2018, A5E44852162-AA