manualshive.com logo in svg

Siemens SITRANS MAG 5100W, Operating Instructions Manual, Page: 31 / 65

Share
Download
Siemens SITRANS MAG 5100W Operating Instructions Manual Download Page 31

 

29

 

6

Service and maintenance 

6.1

 

Maintenance 

The device is maintenance-free, however, a periodic inspection according pertinent 

directives and regulations must be carried out.  
An inspection can include check of: 
●

 

Ambient conditions 

●

 

Seal integrity of the process connections, cable entries, and cover screws 

●

 

Reliability of power supply, lightning protection, and grounds 

6.2

 

Recalibration 

Siemens A/S Flow Instruments offers to recalibrate the sensor. The following calibrations are 

offered as standard:  
●

 

Standard matched pair calibration 

 

 

Note 

 

For recalibration the memory unit must always be returned with the sensor 

 

6.3

 

Transportation/storage 

 

The sensor is a fragile piece of equipment. Impact and shock can 

cause measuring inaccuracy. Therefore during transportation it must 

be placed in the transportation box delivered by Siemens Flow 

Instruments. If this is not possible, the alternative sensor packaging 

must be able to withstand the hazards from transportation.  

 

www.eltra-trade.com                                    [email protected] 

+421 552 601 099

Summary of Contents for SITRANS MAG 5100W


































































Reviews:

No comments