Service and maintenance
10
10.1
Dismounting steps
WARNING
Before dismounting, be aware of dangerous process conditions such as e.g. pressure
in the vessel or pipeline, high temperatures, corrosive or toxic media etc.
Take note of chapters "
Mounting
and "
Connecting to voltage supply
and carry out
the listed steps in reverse order.
10.2
Disposal
The device is made of recyclable materials. For this reason, it should be disposed of
by a specialist recycling company. Observe the applicable national regulations.
Devices described in this manual should be recycled. They may not be disposed of in
the municipal waste disposal services according to the Directive 2012/19/EC on waste
electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC, or to a locally approved
disposal service for eco-friendly recycling. Observe the specific regulations valid in
your country.
Further information about devices containing batteries can be found at: (
support.industry.siemens.com/cs/document/109479891/
)
Note
Special disposal required
The device includes components that require special disposal.
• Dispose of the device properly and environmentally through a local waste
disposal contractor.
SITRANS LR140
Operating Instructions, 08/2020,
A5E50352144
41
