Remote operation
7.1 Operating via AMS Device Manager
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH
85
7.1.9.6
Maintenance & Diagnostics (LTB)
Note
For more detailed explanations of the parameters listed below see the pages referenced.
Navigate to
Configure/Setup > LTB > Maintenance and Diagnostics
for access to:
Remaining Sensor Lifetime
[see
Remaining Sensor LIfetime (4.3.)
]
•
Lifetime (expected) [see
Lifetime (expected) (4.3.1.)
]
•
Time in Operation [see
Time in Operation (4.3.2.)
]
•
Remaining Lifetime [see
Remaining Lifetime (4.3.3.)
]
•
Activation of Reminders [see
Activation of Reminders (4.3.4.)
]
•
Reminder 1 before Lifetime (Required) [see
Reminder 1 before Lifetime (Required)
(4.3.5.)
]
•
Reminder 2 before Lifetime (Demanded) [see
Reminder 2 before Lifetime (Demanded)
(4.3.6.)
]
1.
Open the window
Remaining Sensor Lifetime
2.
After modifying values/units as required, click on
Apply
to accept the change.
•
Click on
Sensor Replaced
to reset Time in Operation to 0 hours
•
Click on
Snooze for 1 Year
to add a year to the Total Expected Sensor Life