manualshive.com logo in svg

Siemens SITRANS L Series, Operating Instructions Manual, Page: 80 / 106

Share
Download
Siemens SITRANS L Series Operating Instructions Manual Download Page 80

Setup with SIMATIC PDM EDD

11

11.1

Setup with SIMATIC PDM EDD

Device descriptions as Enhanced Device Description (EDD) are available for DD

adjustment programs such as for example PDM.

Download

SIMATIC PDM is a software package used to commission and maintain process

devices.

https://support.industry.siemens.com/cs/ww/en/view/109755005

Check the support page of our website to make sure you have the latest version of

SIMATIC PDM, the most recent Service Pack (SP) and the most recent hot fix (HF). Go

to:
Software downloads: 

http://www.siemens.com/processinstrumentation/downloads

In the product tree, navigate to: " 

Automation Technology > Process Control Systems

> SIMATIC PCS 7 > System Components > Plant Device Management > SIMATIC PDM

"

. 

Start

Proceed as follows:

1.

Launch SIMATIC PDM, connect to device, and upload data from the device.

2.

Adjust parameter values in the parameter value field. Then click Enter. The

 

status fields read " 

Changed

"

. 

SITRANS LR150

Operating Instructions, 08/2020, 

A5E50352155

71

Summary of Contents for SITRANS L Series











































































































Reviews:

No comments