Siemens SITRANS L Series Operating Instructions Manual Download Page 35

Page: 35 / 106

Setup with the integrated HMI
7.2 Structure and views of the display

Key

Function

Measured value view: Select the desired measured value
Parameter view: Select parameter
Editing view: Change parameter value downwards

Measured value view: Navigate to main menu or parameter view
Parameter view: Navigate to edit view
Editing view: confirm selected parameter value

Time functions

If the respective key is pushed, the scrolling speed or the parameter change rate

increases. 10 minutes after the last key is pressed, an automatic return to the

measured value view is triggered. Parameter changes that have not yet been

confirmed are lost.

7.2

Structure and views of the display

Structure of the display

Title line

Main line

UP/DOWN navigation arrows

INFO field

Locking symbol

EDIT indicator

INFO indicator

NE 107 diagnostic states

Bar graph

Sign of the process value

Figure 7.2

Structure of the display

SITRANS LR150

Operating Instructions, 08/2020,

A5E50352155

Summary of Contents for SITRANS L Series











































































































Search results

Summary of Contents for SITRANS L Series

Reviews:

Siemens SITRANS L Series, Operating Instructions Manual, Page: 35 / 106

Search results

Summary of Contents for SITRANS L Series

Reviews: