manualshive.com logo in svg

Siemens SITRANS L Series, Operating Instructions Manual, Page: 18 / 106

Share
Download
Siemens SITRANS L Series Operating Instructions Manual Download Page 18

Description

3.3 Adjustment

Functional principle

The transmitter emits a continuous, frequency-modulated radar signal through its

antenna. The emitted signal is reflected by the medium and received by the antenna

as an echo with modified frequency. The frequency change is proportional to the

distance and is converted into the level.

3.3

Adjustment

Local adjustment

On-site adjustment of the device is carried out via the optionally integrated HMI.

Wireless adjustment

Devices with integrated Bluetooth module can be adjusted wirelessly via

Siemens mobile IQ app.

  1  

Transmitter

  2  

Smart device

Figure 3.3

Wireless connection to standard operating devices with integrated Bluetooth LE

Adjustment via the signal cable

Devices with signal output 4 … 20 mA/HART can also be operated via a signal cable.

This is done via an interface adapter and a PC/notebook using SIMATIC PDM.

SITRANS LR150

Operating Instructions, 08/2020, 

A5E50352155

9

Summary of Contents for SITRANS L Series











































































































Reviews:

No comments