Siemens SITRANS L LU240 Compact Operating Instructions Download

Page: 5 / 60

Getting started

Introduction

Use this chapter as a quick reference. It provides links to the steps required for startup.
Before you begin, read the following safety information:
● General safety information (Page 11)
● Basic safety information: Installing/mounting (Page 17)
● Basic safety information: Connecting (Page 23)
● Basic safety information: Commissioning (Page 29)
Read the entire Operating Instructions to achieve optimum device performance.

Procedure

1. Install/mount the device.

Installation location requirements (Page 18)

2. Connect the device.

Connecting SITRANS Probe LU240 (Page 23)

3. Install (optional) display

Install a new display (Page 45)

4. Power up the device.

Activating SITRANS Probe LU240 (Page 29)

5. Commission the device via quick commissioning wizard:

Quick commissioning: Level/Space/Distance/Custom (Page 35)

Quick commissioning: Volume (Page 40)

Quick commissioning: Volume flow (Page 41)

Startup is complete.

SITRANS Probe LU240 with mA/HART

Compact Operating Instructions, 10/2018, A5E42673704-AB

Summary of Contents for SITRANS L LU240





























































Search results

Summary of Contents for SITRANS L LU240

Reviews:

Related manuals for SITRANS L LU240

Brands by name

Popular brands

Siemens SITRANS L LU240, Compact Operating Instructions

Search results

Summary of Contents for SITRANS L LU240

Reviews:

Related manuals for SITRANS L LU240

Brands by name

Popular brands