Installing/mounting
3.1 Basic safety notes
Transducers
16
Compact Operating Instructions, 09/2021, A5E43390688-AC
3.1.1
Installation location requirements
3.1.1.1
Insufficient air supply
WARNING
Insufficient air supply
The device may overheat if there is an insufficient supply of air.
•
Install the device so that there is sufficient air supply in the room.
•
Observe the maximum permissible ambient temperature. Refer to the information in the
section Technical specifications (Page 38).
NOTICE
Aggressive atmospheres
Damage to device through penetration of aggressive vapors.
•
Ensure that the device is suitable for the application.
NOTICE
Direct sunlight
Damage to device.
The device can overheat or materials become brittle due to UV exposure.
•
Protect the device from direct sunlight.
•
Make sure that the maximum permissible ambient temperature is not exceeded. Refer to
the information in Technical specifications (Page 38).
NOTICE
Strong vibrations
Damage to device.
•
In installations with strong vibrations, mount the transmitter in a low vibration
environment.
