Siemens SITRANS FUH1010, Product Instruction Manual, Page: 184 / 264

Appendix A
A.3 RS-232 Connection
FUH1010 IP65 NEMA 4X Precision Volume
Operating Instructions, 01/2013, A5E32122003-AA
183
Navigating through the Installation Menu
After accessing the Installation Menu, you can begin to setup your meter according to the
instructions in this manual. The chart below shows the PC keyboard equivalents to the
keypad keys while you are in the menu.
SITRANS F 1010 Keypad PC Keyboard Description
<Up Arrow> <Up Arrow> Move up 1 menu cell (or Flow Display
screen)
<Down Arrow> <Down Arrow> Move down 1 menu cell (or Flow Display
screen)
<Right Arrow> <Right Arrow> Move right 1 menu cell (or Flow Display
screen)
<Left Arrow> <Left Arrow> Move left 1 menu cell (or Flow Display
screen)
<MENU> ^L (Ctrl L) Toggle between Menu and Flow Display
<DATALOG> ^D (Ctrl D) Generate Datalogger report
<CLR> <Backspace> or <DEL> Deselect list selection
<ALT+Up Arrow> ^U (Ctrl U) Logger Display Page Advance
<+/-> (chg sign) | (bar, shift + backslash) Change numeric sign. Can also type (-)
key
<Enter> <Carriage Return> Enter Key
Digits Digits Numerals zero through 9
/ / Divide by
X * (upper case 8) Multiply by
+ + Plus
- - Minus
= = Equals
. . Decimal Point
Terminal Mode Menu Commands
In addition, the following commands (followed by the <ENTER> key) can be used to control
the meter while in Terminal Mode.
Note
The "n" refers to the meter Channel number. For a 2-Channel Arithmetic site (Ch1 + Ch2 or
Ch1 – Ch2) the virtual Channel is number 3.
Logger
Invokes the download of all data stored in the Datalogger. Note that the Datalogger data is
not erased from the meter memory when it is downloaded. It is recommended to capture this
information into a file with a "csv" extension, which can be easily imported into MS Excel.