manualshive.com logo in svg

Siemens SITRANS FC430, Operating Instructions Manual

Share
Download
Siemens SITRANS FC430 Operating Instructions Manual Download Page 114

2

Dosing Mode

Select the dosing mode to control the valve(s) on the output

3

Dosing options

Setup instructions for the selected dosing mode

4-6

Configure Output

Configure the output to control the valves

7

Process Value

Select the process value

8-15

Configure recipe

Configure the recipe (valve control and fault handling)

16

Active Recipe

Select a dosing recipe

*: Set Operation Mode to Status Mode and set Status Mode to control Primary Valve or 

Secondary Valve.
**: Set Status Mode to Primary Valve or Secondary Valve.
***: Set Operation Mode to Dosing Control.
For dosing setup, see Dosing (Page 431).

6.3.4

Power-up

Power up the device. Devices with local display show a screen for initial startup.

6.4

Commissioning with PDM

For commissioning with SIMATIC PDM, see separate function manual for MODBUS, HART 

or PROFIBUS.

6.4.1

Operating via SIMATIC PDM

SIMATIC PDM is a software package used to commission and maintain process devices.

See also

www.siemens.com/simatic-pdm (

www.siemens.com/simatic-pdm

)

Commissioning
6.4 Commissioning with PDM

FC430 (From firmware 4.0)

114

Operating Instructions, 06/2017, A5E39789392-AA

Summary of Contents for SITRANS FC430























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands