Siemens SITRANS FC410, Operating Instructions Manual, Page: 57 / 160

Commissioning
6.8 Configuring a new device
FC410 with Modbus
Operating Instructions, 02/2016, A5E33120874-AC
55
Image 6-2 Modbus net object properties
– Click OK.
3. Set up the COM interface:
–
Select Modbus Networks.
– Right-click on the object name SITRANS FC410 and select Object Properties.
– Select the Communication tab and configure the Modbus address.
Image 6-3 Set the Modbus address
– Click OK.
6.8 Configuring a new device
Note
Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters NOT being updated.