Siemens SITRANS FC410, Operating Instructions Manual, Page: 130 / 160

Modbus holding registers
A.3 Modbus holding registers tables
FC410 with Modbus
128
Operating Instructions, 02/2016, A5E33120874-AC
Modbus
address
Data type /
Size [bytes]
Parameter Description Default
value [unit]
Value range Access
level
2613 unsigned /
2
Pause totalizer Pause totalizer
Totalizer can only be pau-
sed when running
- Enter 1 to pause Read /
Write
2614 unsigned /
2
Resume totalizer Resume totalizer
Totalizer can only be
resumed when paused
- Enter 1 to pause Read /
Write
A.3.5 Maintenance & Diagnostics
Table A- 8 Access level
Modbus
address
Data type /
Size [bytes]
Parameter Description Default value
[unit]
Value range Access
level
404 Unsigned /
2
Access level Access level status - 32 (logged
in)
4 (logged
out)
Read Only
412 Unsigned /
2
User password Password to enable writing
commands
- 2457 (enab-
le user
password
0 (disable
user pass-
word)
Read /
Write
Table A- 9 Maintenance
Modbus
address
Data type /
Size [bytes]
Parameter Description Default value
[unit]
Value range Access
level
700 Unsigned /
2
Set To Default Reset all parameters to
factory settings
- Enter 1 to
reset
Write
2700 Unsigned /
4
Operating Time Total Total operating time since
first power up
0 [h] - Read Only
2702 Unsigned /
4
Operating Time Operating time since last
power up
0 [h] - Read Only
4088 String / 14 Firmware Time
Stamp
Firmware time stamp
specifies the date and time
when the sensor firmware
was built
- - Read Only
4105 String / 32 Sensor PCBA Serial
Number
Serial number of the sensor
electronic
- - Read only