Siemens SITRANS FC330, Operating Instructions Manual, Page: 239 / 280

C.2 Menu item 2.1: Sensor
Table C-2 Sensor
Level 3 Level 4 More information
No. Name No. Name
2.1.1 Flow direction
2.1.2 Noise damping
2.1.3 Zero point adjustment
2.1.3.1
Method of zero point adjust‐
ment
2.1.3.2
Zero point adjustment
2.1.3.3 Duration
2.1.3.4
Standard deviation limit
2.1.3.5 Standard deviation
2.1.3.6
Offset limit
2.1.3.7 Offset
2.1.4 Aerated flow 2.1.4.1
Aerated flow filter
2.1.4.2 Filter time constant
2.1.4.3
Alarm limit
2.1.4.4 Warning limit
2.1.4.5
Measurement sample time
2.1.4.6 Filter hysteresis
2.1.4.7
Minimum filter time
C.3 Menu item 2.2: Process values
Table C-3 Process values
Level 3 Level 4 Level 5
No. Name No. Name No. Name
2.2.1 Mass flow 2.2.1.1 Units
2.2.1.2 Custom units
2.2.1.3 Custom conversion factor
2.2.1.4 Decimal places
2.2.1.5 Low flow cut-off
2.2.1.6 Alarm and warning limits
2.2.1.6.1 Upper alarm limit
2.2.1.6.2 Upper warning limit
2.2.1.6.3 Lower warning limit
2.2.1.6.4 Lower alarm limit
2.2.1.6.5 Hysteresis
2.2.1.7 Flow adjustment 2.2.1.7.1 Adjustment factor
HMI menu structure
C.3 Menu item 2.2: Process values
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB
239