Siemens SITRANS FC330, Operating Instructions Manual, Page: 237 / 280

HMI menu structure
C
How to read the tables
In the following tables the menus are entered in bold text and the parameters in italic.
The first table shows the main HMI menu, that is HMI menu levels 1 and 2. The following tables
show the HMI submenus, that is HMI menu levels 3 to 5.
The visibility of some parameter/menu items depends on previous selections. For example, if
Frequency is selected on the output, only the frequency setup parameter/menu items are
visible, and the current, pulse, and status output setup parameter/menu items are hidden.
C.1 Main menu
In the following table only the menus and parameters of the first two levels of the HMI menu
structure are listed.
Table C-1 Main menu
Level 1 Level 2 More information
No. Name No. Name
1 Quick Start 1.1 Quick commissioning Quick commissioning wizard (menu
item 1.1) (Page 88)
1.2 Zero point adjustment Zero point adjustment wizard (menu
item 1.2) (Page 90)
1.3 Process values Process values wizard (menu item 1.3)
(Page 92)
1.4 Inputs and outputs Menu item 2.4: Inputs and outputs
(Page 244)
1.5 Gas application Gas application wizard (menu item 1.5)
(Page 99)
1.6 Pulsating flow Pulsating flow wizard (menu item 1.6)
(Page 100)
1.7 Dosing application Dosing application wizard (menu item
1.7) (Page 101)
1.8 Copy configuration Copying the application setup from one
device to another (Page 189)
1.9 Communication Menu item 4: Communication
(Page 267)
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB
237