manualshive.com logo in svg

Siemens SITRANS FC310, Compact Operating Instructions, Page: 41 / 54

Share
Download
Siemens SITRANS FC310 Compact Operating Instructions Download Page 41

6.3

Maintenance and repair work

WARNING

Impermissible repair of the device
● Repair must be carried out by Siemens authorized personnel only.

WARNING

Impermissible repair and maintenance of the device
● Repair and maintenance must be carried out by Siemens authorized personnel only.

WARNING

Impermissible repair of explosion protected devices
Risk of explosion in hazardous areas
● Repair must be carried out by Siemens authorized personnel only.

WARNING

Maintenance during continued operation in a hazardous area
There is a risk of explosion when carrying out repairs and maintenance on the device in a 

hazardous area.
● Isolate the device from power.
- or -
● Ensure that the atmosphere is explosion-free (hot work permit).

WARNING

Impermissible accessories and spare parts
Risk of explosion in areas subject to explosion hazard.
● Only use original accessories or original spare parts.
● Observe all relevant installation and safety instructions described in the instructions for the 

device or enclosed with the accessory or spare part.

Service and maintenance

6.3 Maintenance and repair work

SITRANS FC310

Compact Operating Instructions, 01/2019, A5E44932112-AB

41

Summary of Contents for SITRANS FC310























































Reviews:

No comments