manualshive.com logo in svg

Siemens SITRANS F US SONOKIT, Operating Instructions Manual, Page: 54 / 95

Share
Download
Siemens SITRANS F US SONOKIT Operating Instructions Manual Download Page 54

Service and maintenance 

 

8.3 Technical support 

 

SITRANS FUS080 transmitter 

52

 

Operating Instructions, 07/2012, A5E03059912-02 

Resetting the internal battery counter 

After replacing the batteries, reset the internal battery counter (Page 31) in order to indicate 

the power capacity correctly. 

8.3

 

Technical support 

If you have any technical questions about the device described in these Operating 

Instructions and do not find the right answers, you can contact Technical Support:    
●  Via the Internet using the Support Request:  

 Support request (

http://www.siemens.com/automation/support-request

)  

●  Via Phone: 

–  Europe: +49 (0)911 895 7222 
–  America: +1 423 262 5710 
–  Asia-Pacific: +86 10 6475 7575 

Further information about our technical support is available in the Internet at  

Technical support (

http://support.automation.siemens.com/WW/view/en/16604318

) 

Service & Support on the Internet     

In addition to our documentation, we offer a comprehensive knowledge base online on the 

Internet at:  
Service and support (

http://www.siemens.com/automation/service&support

)  

There you will find: 
●  The latest product information, FAQs, downloads, tips and tricks. 
●  Our newsletter, providing you with the latest information about your products. 
●  A Knowledge Manager to find the right documents for you. 
●  Our bulletin board, where users and specialists share their knowledge worldwide. 
●  You can find your local contact partner for Industry Automation and Drives Technologies 

in our partner database. 

●  Information about field service, repairs, spare parts and lots more under "Services." 

Additional Support   

Please contact your local Siemens representative and offices if you have additional 

questions about the device 
Find your contact partner at: 
Local contact person (

http://www.automation.siemens.com/partner

)  

Summary of Contents for SITRANS F US SONOKIT
































































































Reviews:

No comments