Siemens SITRANS F TRANSMAG 2, Operating Instructions Manual, Page: 93 / 126

Parameters
A
The device functions and parameters are listed below with the factory setting and setting option.
The menu code only appears in the local display.
Display
Table A-1 Function group display parameters
Menu code Device func‐
tion,
Parameters
Description Factory setting Setting options
1.1 Display Param. Setting parameter for the local display
Language Language for user guidance Deutsch
• English
• Deutsch
• Français
• Italiano
• Español
• Nederlands
1.1.2 Line 1 Definition of measured values to be dis‐
played for line 1 in multi-display Flow
• Flow
• Totalizer net
• Flow velocity
• Analog Val. 1, 2,
• Frequency
1.1.3 Line 2 Definition of measured values to be dis‐
played for line 2 in multi-display Totalizer net
• Flow
• Totalizer net
• Flow velocity
• Analog Val. 1, 2,
• Frequency
1.1.4 Display flow Selection for type of presentation of the
flow rate (% and bargraph only apply to line
2)
When the "Flow" parameter has been selec‐
ted for lines 1 and 2, "Bargraph in %" is al‐
ways shown in line 2. Engineering Unit • Engineering Unit
• %
• Bargraph in %
1.1.5 LCD lighting Lighting of the display
On: permanently switched on
Off: automatic switch on by pressing key,
switch off after 10 min Off
• On
• Off
TRANSMAG 2 with MAG 911/E
Operating Instructions, 03/2021, A5E00102775-AC
93