MAG 6000 I / MAG 6000 I Ex de transmitter
Operating Instructions, 04/2016, A5E02083319-AG
61
Technical data
11
11.1
Technical specifications
Technical specifications for MAG 6000 I standard and Ex version
Mode of operation and design
Measuring principle
Electromagnetic with pulsed constant field
Empty pipe
Detection of empty pipe (special cable re-
quired in remote mounted installation)
Excitation frequency
Depends on sensor size
Electrode input impedance
> 1 x 10
14
Ω
Input
Digital input
11 to 30 V DC, R
i
= 4.4 kΩ
Activation time
50 ms
Current
I
11 V DC
= 2.5 mA, I
30 V DC
= 7 mA
Output
Current output
Signal range
0 to 20 mA (active/passive)
Active current output
R
max
500 Ω @ V
max
30 V DC
Passive current output
R
min
0 Ω @ V
min
12 V DC
R
max
500 Ω @ V
max
30 V DC
Time constant
0.1 to 30 s, adjustable
Digital output
Frequency
0 to 10 kHz, 50% duty cycle
(uni/bidirectional)
Time constant
0.1 to 30 s, adjustable
Pulse (passive)
3 to 30 V DC, max. 110 mA (Ex version:
max. 30 mA), 200
Ω
≤ R
i
≤10 kΩ
(powered
from connected equipment)
Time constant
0.1 to 30 s, adjustable
Relay output
Time constant
Changeover relay, same as current output
Load
30 VAC/2 A, 24 VDC/1 A
Low flow cut off
0 ... 9.9% of maximum flow
Galvanic isolation
All inputs and outputs are galvanically isolated PELV circuits with 60 VDC isolation
from each other and ground. Exceptions are sensor connections that are connected
to ground.
Max. measuring error
(incl. sensor and zero point)
MAG 6000 I/MAG 6000 I Ex de
±0.2% ± 1 mm/s
1)
Rated operation conditions
Ambient temperature
Summary of Contents for SITRANS F MAG 6000 EX DE
Page 2: ......