Commissioning
6.6 Changing operator menu setup
45
Changing decimal point position
1.
Enter the respective totalizer menu.
2.
Use select key to position cursor below decimal point.
3.
Use change key to move decimal point to requested position.
Changing units
1.
Use select key to position cursor below unit.
2.
Press change key until requested unit is displayed.
6.6
Changing operator menu setup
In the operator menu the menus required for daily operation of the flowmeter are shown. It is
possible to hide and change some of the menus in the operator menu. This is done in the
operator menu setup menu, see operator menu setup diagram.
Customizing menus in operator menu
To customize the menus in the operator menu perform the following steps:
1.
Press top up key for 2 sec.
2.
Enter password.
3.
Use forward key or backward key to reach operator menu.
Changing text in line 1
1.
Press lock/unlock key to unlock setting.
2.
Use change key to select desired text.
3.
Press lock/unlock key to confirm selected text.
Note
If "Text" is selected in line 2, this line functions as a heading for the value shown in line 3.
Otherwise it shows the actual value of the reading selected.
Enabling two readings
1.
Use forward key to reach requested menu.
2.
Press lock/unlock key to unlock setting.
3.
Use select key to move cursor to upper line.
4.
Use change key to select requested reading.
5.
Press lock/unlock key to confirm selection.
www.eltra-trade.com [email protected]
+421 552 601 099
Summary of Contents for SITRANS F M MAG 5000
