6.3
Transportation and storage
To guarantee sufficient protection during transport and storage, observe the following:
• Keep the original packaging for subsequent transportation.
• Devices/replacement parts should be returned in their original packaging.
• If the original packaging is no longer available, ensure that all shipments are properly
packaged to provide sufficient protection during transport. Siemens cannot assume liability
for any costs associated with transportation damages.
CAUTION
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
• Provide additional packaging as necessary.
Special conditions for storage and transportation of the device are listed in Technical data
(Page 73).
6.4
Repair
WARNING
Impermissible repair of explosion protected devices
Risk of explosion in hazardous areas
• Repair must be carried out by Siemens authorized personnel only.
WARNING
Impermissible accessories and spare parts
Risk of explosion in areas subject to explosion hazard.
• Only use original accessories or original spare parts.
• Observe all relevant installation and safety instructions described in the instructions for the
device or enclosed with the accessory or spare part.
6.5
Ordering of spare parts
Condition
• You have a Siemens Industry Mall account.
Service and maintenance
6.5 Ordering of spare parts
SITRANS FM MAG 3100
52
Operating Instructions, 12/2021, A5E03005599-AE