Parameter
Factory settings
Possible settings
Flow unit factor
3600 (for flow unit m
3
/h)
Auto set from unit guide
Totalizer volume unit factor
1
Auto set from unit guide
Flow unit text
m
3
/h
Auto set from unit guide, but only m
3
/h
can be shown on display
Totalizer unit text
m
3
Auto set from unit guide, but only m
3
can
be shown on display
Totalizer directions
Totalizer 1 direction
Forward
Forward/Reverse/Forward net/Reverse
net
Totalizer 2 direction
Reverse
Forward/Reverse/Forward net/Reverse
net
Output A
Active
On
On/off
Direction
Factory pre-configured according order
code.
Preset: Forward
Forward/Reverse/Forward net/Reverse
net
Amount per pulse
Factory pre-configured according order
code, i.e. 0.1 m
3
Unit: The same as Totalizer unit
Value freely selectable
Pulse width
Factory pre-configured according order
code. Typically 5 ms
5, 10, 20, 50, 100, 200, 500 ms
Output B
Active
On
On/Off
Function
Alarm
Pulse/Alarm/Call up
Direction
No influence, while "Alarm"
Forward/Reverse/Forward net/Reverse
net
Amount per pulse
No influence, while "Alarm"
Unit: The same as Totalizer unit
Value freely selectable
Pulse width
No influence, while "Alarm"
5, 10, 20, 50, 100, 200, 500 ms
B.2
Factory settings for Modbus communication
Parameter
Default setting
Slave device address
1
Data transmission rate
19 200 baud
Vertical parity position
Even 1 stop
Response timeout
10000 ms
Response delay
5 ms
Interframe space
35 bits
The settings can be changed via SIMATIC PDM or via the Modbus.
Settings
B.2 Factory settings for Modbus communication
FUS380/FUE380
98
Operating Instructions, 09/2016, A5E00730100-AB