Diagnosing and troubleshooting
9.2 Application questionnaire
SITRANS F Ultrasonic flowmeters FST030 (HART)
Operating Instructions, 08/2017, A5E35971532-AC
87
9.2
Application questionnaire
In case the device needs service, the factory will typically request information about
application and flowmeter.
Fill in this form and attach it to a Support request on:
Services & Support (
http://www.siemens.com/automation/service&support
To:
"Your local Siemens contact"
From:
Company:
E-mail:
Phone no.:
Fax no.:
Note
Sketch
It is recommended to prepare a diagram/sketch of the installation/application explaining inlet
and outlet conditions; distance from pump; etc.
Table 9- 2
Application data
Liquid
•
Chemical formula
•
Medium name
•
Concentration
•
Density
•
Medium viscosity at 20 °C (68 °F)
[mPa s]
•
Medium viscosity at process tem-
perature
[mPa s]
Flow measurement range
Nominal size
[m]
Process temperature
Ambient temperature (transmitter)
Process pressure
Gas/solid content
Explosion protection
Table 9- 3
Device data
Transmitter serial number
System type