Operation
6.5 Trace menu
SITRANS DA400 for material flow monitoring with protection against explosion
52
Operating Instructions, 09/2007, A5E00841152-01
6.4.5
Parameter lock
You can activate a parameter lock by special use of a universal input.
To do that, an electrical connection must be set up (e.g., wire jumper in the device, external
key switch) and an appropriate input parameter must be assigned.
input
Configuration
Connecting terminals
In 1
P.26/INP1 = noPA
55 = 58
In 2
P.27/INP2 = noPA
65 = 68
In 3
P.28/INP3 = noPA
75 = 78
In 4
P.29/INP4 = noPA
85 = 88
If several inputs are parameterized with the function "noPA," the function will be activated
upon switching on ("ORing").
See also
6.5
Trace menu
6.5.1
Trace menu overview
Introduction
The trace menu is used to display and reset timers. The following timers are displayed in the
trace menu:
●
Operating time of the device
●
Times at which the alarms were activated
Elements of the digital display in the trace menu
Figure 6-11 Trace menu digital display
➀
Timer value
②
Timer name
