NOTICE
Electrostatic sensitive devices (ESD)
When you touch electrostatic sensitive components, you can destroy them through voltages
that are far below the human perception threshold.
If you work with components that can be destroyed by electrostatic discharge, observe the ESD
Guideline.
3.3.2
Data protection
Siemens observes the data protection guidelines, especially the requirements regarding data
minimization (privacy by design). This means the following for this product: The product does
not process / save any personal information, but only technical functional data (e.g. time
stamps). If the user links this data to other data (e.g. shift plans) or if the user saves personal
information on the same medium (e.g. hard disk) and therefore creates a personal reference in
the process, the user has to ensure meeting the guidelines regarding data protection.
3.3.3
Notes on use
NOTICE
Possible functional restrictions in case of non-validated plant operation
The device is tested and certified based on the technical standards. In rare cases, functional
restrictions can occur during plant operation.
Validate the correct functioning of the plant to avoid functional restrictions.
Note
Use in an industrial environment without additional protective measures
This device is designed for use in a normal industrial environment.
Security notification
• Follows the general security rules for networks.
• Install hardware firewall before connecting to internet. Install software firewall on the device
and open necessary ports only.
• Deploy DLP (data leakage protection) over your system to protect sensitive data.
• Install the device in cabinets, separate rooms or controlled areas. Only authorized personnel
may access the device using locks or similar measures.
Safety notes
3.3 Basic safety notes SITRANS CC220
Smart Condition Monitoring with IIoT Sensors
16
Operating Instructions, 08/2021, A5E50573389-AA