Parameter
Meaning
Example
Default
Description
String with a maximum of 16 characters with
which the user can, for example, describe the
location of the WirelessHART adapter.
● Only a limited character set can be used:
@ A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z [ \ ] ^ _ blank ! " # $ % & ' ( ) * + ,
- . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ?
Area 2 Tank 3
Date
Date in dd.mm.yyyy, for example the date of the
last change.
10.10.2009
01.10.2009
Message
Message with a maximum of 32 characters that
can be used for any purpose.
● Only a limited character set can be used:
@ A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z [ \ ] ^ _ blank ! " # $ % & ' ( ) * + ,
- . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ?
Polling address
HART address of the WirelessHART adapter
● Default setting 15
● Range 0 ... 63
15
15
Serial number
Serial number of the WirelessHART adapter
Order number
Order number of the WirelessHART adapter
Order number exten‐
sion
Extension to the order number
Country
Code for the country in which the Wireles‐
sHART adapter is operated.
DE
DE
SI units
All the unit-related parameters of the Wireles‐
sHART adapter can be selected.
● SI units only
● All
SI units only
All
9.3
Wireless communication
Here, you configure the parameters required to integrate the WirelessHART adapter in a
wireless network.
With the network identification and four-part join key, the WirelessHART adapter can be
integrated in an existing WirelessHART network. For security reasons, the join key is not shown
in the offline table since this is the password that the WirelessHART adapter uses to connect
Parameter assignment/addressing
9.3 Wireless communication
WirelessHART Adapter SITRANS AW200
Operating Instructions, 02/2020, A5E02777161-AA
51
