3. Screw the coupling
②
into the connector on the field device.
4. Release the locking nut
③
of the WirelessHART adapter.
5. Place the mounting collar
④
of the WirelessHART adapter on the coupling screwed into the
field device and screw the connecting piece onto it using a wrench.
6. If necessary, align the adapter.
7. Tighten the locking nut
⑤
.
5.6
Mounting at a distance
It may be necessary to install the adapter at a distance from the field device in a variety of
situations. This might be, for example:
● There is not enough space to install the adapter on the field device.
● The reception of the wireless signals is not adequate where the field device is located.
● The vibration on the field device is higher than the recommended range.
The WirelessHART adapter can be secured to a wall, a mast or other objects. In this case the
connection between the WirelessHART adapter and the field device is implemented with cable
and cable connectors that do not ship with the product.
Assembling
5.6 Mounting at a distance
WirelessHART Adapter SITRANS AW200
Operating Instructions, 02/2020, A5E02777161-AA
27
